| Rackmount Power Distribution - Professional 15 Amp |
|
| Model |
Description |
Pricing |
ETA-C15D
 |
Professional 10 Outlet 15A Rackmount Power Distribution with Single Retractable Rack Light & Digital Voltmeter
• Dual Clamping Spike & Surge Protection
• EMI / RFI Filtration
• Extreme Voltage shut down (<101V & >132V)
[more] |
|
|
|
|
|
AP-GNL18
 |
Gooseneck Light
For use with:
• ETA-C15D
• ETA-ECS3
[more] |
|
|
|
|
|
| |
| Rackmount Power Distribution - Professional 20 Amp |
|
| Model |
Description |
Pricing |
ETA-S20RT
 |
9 outlet 20A AC Power Distribution, Surge Suppression with Remote Activation
• Spike & Surge Protection
• EMI/RFI filtration
• Remote activation via latched dry contact closure or DC voltage - w/status LED terminals
[more] |
|
|
|
|
|
| |
| Rackmount Power Distribution - 15 Amp |
| Model |
Description |
Pricing |
ETA-PD8A
 |
9 Outlet / 15A Rackmount Power Distribution
Features:
• 9 Total Outlets
• 8 Rear Panel Outlets: 7 Switched and 1 Always On
[more] |
|
|
|
|
|
ETA-PD8LA
 |
9 Outlet / 15A Rackmount Power Distribution with Light
Features:
• Front Pull Out LED Lamp with Dimmer
• 9 Total Outlets
[more] |
|
|
|
|
|
| |
| Modular Power Distribution - Power Module Sequential Controllers |
|
| Model |
Description |
Pricing |
ECS6RM
 |
6 Stage Electrical Control Sequencer
• 6 Sequencer Timing Sections - 1,3, or 6 user programmable time delays
• 6 Independent electrical control module connections
• 6 Independent contact closure connections
[more] |
|
|
|
|
|
ETA-SEQ6
 |
‡6 output Electrical Control Sequencer
• 6 outputs configurable individually for either 24V DC or contact closure
• 2 separate time delay trimmers ranging from 1 second to 6 minutes
• Activated by front panel switch, hard switch contact closure, momentary switch or DC voltage
[more] |
|
|
|
|
|
| |
| Rackmount Power Distribution - Sequential Power |
| Model |
Description |
Pricing |
ECS-3
 |
(Atlas Brand) 9 Outlet 15A Rackmount Sequential Power Distribution with Single Retractable Rack Light & Digital Voltmeter
• Spike & Surge Protection
• EMI / RFI Filtration
• Sequential Power Up / Down - 3 seconds per stage
[more] |
|
|
|
|
|
| |
| Modular Power Distribution - Power Module Sequential Controllers |
|
| Model |
Description |
Pricing |
ETA-SEQ6 PS
 |
6 output Electrical Control Sequencer with power supply
• 6 outputs configurable individually for either 24V DC or contact closure
• 2 separate time delay trimmers ranging from 1 second to 6 minutes
• Activated by front panel switch, hard switch contact cl
|
|
|
|
|
|
TSD-PS24V500MA
 |
|
|
| |
| Modular Power Distribution - Power Modules |
|
| Model |
Description |
Pricing |
ETA-15SH
 |
2 Outlet 15A Stand-Alone Power Distribution
• Excellent for use with Plasma / LCD displays
• Spike & Surge Protection
• EMI / RFI Filtration
[more] |
|
|
|
|
|
ETA-20SH
 |
2 Outlet 20A Stand-Alone Power Distribution
• Spike & Surge Protection
• EMI / RFI Filtration
• Watchdog Circuitry (AC Fault)
[more] |
|
|
|
|
|
ETA-ECM30
 |
NEMA L5-30R 30A Power Distribution Raceway Module
• NEMA L5-30R 30A Twist lock receptacle
• Spike & Surge Protection
• Watchdog Circuitry (AC Fault)
[more] |
|
|
|
|
|
ECM-20M
 |
2 Outlet 20A Power Distribution Raceway Module with Current Monitoring
* Spike & Surge Protection
* EMI / RFI Filtration
* Watchdog Circuitry (AC Fault)
[more] |
|
|
|
|
|
ETA-ECM2063
 |
‡12 outlet Complete Raceway filled with 3 20A circuits of power distribution and surge suppression
• Use as 1x 20 Amp raceway with 12 outlets or 60 Amp raceway with 12 outlets
• Hardwire hook up in Single or three Phase
• Control with ETA-SEQ6
|
|
|
|
|
|
| |
| Modular Power Distribution - Power Module Housing/Raceways |
|
| Model |
Description |
Pricing |
ECM-RACEWY1
 |
Electrical Housing for up to 1 ETA Power Module
|
|
|
|
|
|
ECM-RACEWY3
 |
Electrical Housing for up to 3 ETA Power Modules
|
|
|
|
|
|
ECM-RACEWY6
 |
Electrical Housing for up to 6 ETA Power Modules
• Formerly known as ETA-ECMRACEWY6
• Includes 2 blank panels
|
|
|
|
|
|
| |
| Modular Power Distribution - Sequential Power Accessories |
|
| Model |
Description |
Pricing |
ECM-3BP
 |
(3) Blank Panels for Raceway
|
|
|
|
|
|
ECM-ACIN
 |
Cable Pack for Raceway
• 140" of 12 guage UL wire in each of Green, White and Black wires
• For wiring the ETA-ECM20 Modules together plus additional length for wiring the incoming AC to an AC Mains panel
• Note: It may take more than one ECM-ACIN wire kit depending on how many AC Mains are being used and the distance from the AC Mains Panel
|
|
|
|
|
|
ECS-KSW6
 |
Key Switch for ETA-ECS6RM
• Monitor LEDs for each stage of sequencing
• Use CAT5 (8 conductor, RJ45) cabling between switch and control sequencer
|
|
|
|
|
|
TSD-RMK
 |
RACK MOUNT KIT FOR ETA-SEQ6
|
|
|
|
|
|
| |
| Power Distribution - Wall Mount Bracket |
| Model |
Description |
Pricing |
WPD-KSWCC
 |
The WPD-KSWCC is a decor style wall plate featuring an industrial tubular key switch that activates/deactivates a hard latch contact closure. This product is designed to be used with compatible ETA and Atlas Power products that are designed to be remotely activated such as the ECS-6RM, ETA-SEQ6, and ETA-S20RT. The unit is constructed of durable ABS material and includes a red LED system status indicator as well as a removable label guard for easy and clean designation of key switch function. The unit has a four conductor interface connection designed to work with the included Phoenix style connector. This unit can function in remote activation scenarios up to 200 feet from the controlled unit using 22-gauge wire.
|
|
|
|
|
|
WPD-KSWM
 |
The WPD-KSWM is a decor style wall plate featuring an industrial tubular key switch that activates/deactivates a momentary contact closure. This product is designed to be used with compatible ETA and Atlas Power products that are designed to be remotely activated with a Contact Closure type switch (ETA-S20RT, ECS-6RM, ETA-SEQ6, or stand alone models ECM20). The unit is constructed of durable ABS material and includes a red LED system status indicator as well as a removable label guard for easy and clean designation of key switch function. The unit has a four conductor interface connection designed to work with the included Phoenix style connector.
This unit can function in remote activation scenarios up to 200 feet from the controlled unit using 22-gauge wire.
|
|
|
|
|
|